Accessories
Neoptix has developped a large number of accessories that complement your systems. Accessories are classified by their uses:
• Transport cases and enclosures
• Optical extensions cables and patchcord
• Communication and power accessories
• Service
• Various accessories and parts
-
Reflex Transport CaseProtective case for Reflex signal conditioner, aluminum with foam to fit signal conditioner, sensors and accessories.
Fits: Reflex Signal Conditioner
Part number: RFX-CAS
OmniFlex ATA-300 Transport CaseTransport case for the OmniFlex System, ATA-300 compliant, two drawers for storing sensors and extensions. Also act has rackmount enclosure. Wells and retractable handle optional
Fits: OmniFlex Signal Conditioner
Part number: OFX-CAS-
T1 probe plastic box Supplementary plastic box to store your T1 fiber optic temperature probe.
Free of charge
Fits: T1 general temperature probe
Part number: T1S-CAS
-
NEMA Enclosure for T/Guard signal conditioner NEMA-4 enclosure for "t/Guard" signal conditioner, user can add environmental control
Fits: T/Guard System
Part number: NXP-300
-
NEMA Enclosure for T/Guard+ System NEMA-4 enclosure for "t/Guard+" System, user can add environmental control
Fits: T/Guard+ System
Part number: NXP-300
-
Full climate control for NEMA enclosures Climate controlled option NEMA-4 enclosure for "t/Guard" and "t/Guard+" signal conditioners. Heating/cooling controlled with internal thermostat, specify 120V or 220VAC
Fits: All of Neoptix NEMA enclosures
Part number: NXP-301
-
Heating option for NEMA enclosures Heating option NEMA-4 enclosure for "t/Guard" and "t/Guard+" signal conditioners. Heating controlled with internal thermostat, 550 Watts heater, specify 120V or 220VAC
Fits: All of Neoptix NEMA enclosures
Part number: NXP-310
-
19" Rackmount panel for Reflex signal conditioner Rack Mount Panel for Reflex family of signal conditioner, available for 3 or 5 Reflex signal conditioners, standard 19 inches width. Factory installation.
Fits: Reflex signal conditioner
Part number: RFX-RMX (X= for 3 or 6 Reflex)
-
3mm Diameter Fiber Optic Extension cable Fiber optic extension cable, 3 mm O.D. polyurethane sheath, Kevlar reinforcement and PVC liner, ST connectors at both ends. Very tough cable!
Fits: All Neoptix probes and signal conditioners
Part number: EXT-XXX (XXX=Length in meter)
-
Fiber Optic Extension Cable Bundle Fiber-optic extension cable bundle, fan-out with ST connectors at both ends, up to 32 fibers. Contact Neoptix for details
Fits: All Neoptix probes and signal conditioners
Part number: BXT-Y-XXX (Y=Number of fibers; XXX=Length in meters)
-
Armored Fiber Optic Extension Cable Steel armored fiber optic extension cable, ST connectors at both ends, 4 mm O.D. This one is VERY tough!
Fits: All Neoptix probes and signal conditioners
Part number: EXT-ARM-XXX (XXX=Length in meters)
-
Patch cord
50 cm length fiber optic extension cable, ST connectors at both ends, 3mm O.D. polyurethane with Kevlar reinforcement. Leave-it on your Nomad connectorto keep the connector as new!
Fits: All Neoptix probes and signal conditioners
Part number: EXT-3MP-0.5
-
ST-ST MatingST-ST mating to connect extension cable and optical sensors
Fits: All Neoptix probes and signal conditioners
Part number: STM
-
T1 Teflon protective cap
Teflon (PTFE/FEP) protective cap option for T1 temperature probe, 5 cm length, other length available on request
Part number: NXP-101
-
T1 Teflon protective spiral wrap
PTFE Teflon protective spiral wrap for T1 temperature probe, custom length. Add a strength to your T1 fiber optic temperature probe
Part number: NXP-100
-
Serial Cable Shielded RS-232C Serial cable, non-twisted, DB9F to DB9M, 2 meters, to mate all of Neoptix signal conditioners to PC
Fits: All Neoptix probes and signal conditioners
Part number: NXP-304
-
Power Supply for the T/Guard - DIN Rail version DIN rail mountable 24 VDC universal (100-240VAC @ 47-63 Hz), 0.6A, power supply for your T/Guard Signal Conditioner
Fits: T/Guard Signal Conditioner
Part number: TGD-DPS -
Power Supply for the T/Guard+ - DIN Rail version
DIN rail mountable 24 VDC universal (100-240VAC @ 47-63 Hz), 2.5A, power supply for your T/Guard+ Signal Conditioner
Fits: T/Guard+ Signal Conditioner
Part number: TGP-DPS
-
Power Supply for Reflex and T/Guard - Tabletop version 18 VDC universal (100-240VAC @ 47-63 Hz) power supply for your Reflex and T/Guard Signal Conditioner. Desktop version with 1.5 meter cable. Includes wall plug for your country
Fits: Reflex and T/Guard Signal Conditioner
Part number: NXP-303
-
Power Supply for the T/Guard+ System - Tabletop version
24 VDC, 2A, universal (100-240VAC @ 47-63 Hz) power supply for your T/Guard+ Signal Conditioner. Desktop version with 1.5 meter cable. Includes wall plug for your country
Fits: T/Guard+ System
Part number: TGP-TP
-
Kit of rechargeable batteries & charger for NomadKit of 4 of standard AA NiMH Rechargeable batteries and universal charger (100-240VAC @ 47-63 Hz), North American plug.
Fits: Nomad Portable
Part number: NMD-BAT
-
RS-232 / RS-485 Converter RS-232 / RS-485 Converter for communication with MODBUS signal conditioners, compatible with half and full-duplex RS-485. Includes 12 VDC universal input power module.
Fits: T/Guard Signal Conditioner
Part number: NXP-318
-
Extended Warranty
Signal conditioner Extended Warranty, one extra year for a total of 2 or 3 years. Include 1 calibration per extra year (shipping and brokerage costs not included).
Fits: All of Neoptix signal conditioners
Part number: EWR-X (X=1 or 2 extra years) -
On-site technical support & training
Neoptix offers on-site technical support and training on our fiber-optic signal conditioners and sensors. Great help during commissionning of a transformer!
Part number: NXP-601 -
Sensor Maintenance
Fiber-optic temperature sensor maintenance; Includes cleaning and calibration certificate
Fits: All Neoptix and Nortech-Fibronic, Inc. sensors
Part number: CAL-TSE
-
System Maintenance
Signal conditioner maintenance. Includes cleaning, recalibration and new calibration certificate.
Fits: All of Neoptix and Nortech-Fibronic, Inc. signal conditioners
Part number: CAL-SYS
-
Reconnectorization
Reconnectorization of Neoptix fiber optic sensor or extension cable, includes new ST connector
Fits: All of Neoptix tempearture probes and extension cables
Part number: NXP-604
-
Cryogenic calibration
Signal conditioner cryogenic range special calibration. Your instrument will be able to read temperature down to 35 Kelvin
Fits: All of Neoptix signal conditioner
Part number: CAL-CRY
-
Fiber Optic Cleaning Kit
Fiber optic cleaning kit
Part number: CLN-KIT
-
NPT blank plug for Tank Wall Plate NPT plug for fill unused OFT port on TWP, SS-316, ANSI threads, unmachined part.
Fits: Neoptix Tank Wall Plate
Part number: NXP-307
-
Optical feedthrough leak test certificate
Helium Leak test certificate for Neoptix OFT optical feedthroughs
Fits: OFT and M14 optical feedthroughs
Part number: OFT-LKT
-
Spool for extension cables
Spool for fiber optic extension cable (cable not included)
Fits: 3mm OD fiber optic extension cables
Part number: NXP-306
-
Single-port "L" Shape bracketOne port "L" Shape support bracket, 2" x 1.5", carbon steel, spot weldable, for connection inside transformer, includes the ST-ST mating
Fits: T1 sensor and T2 transformer probe
Part number: NXP-308
-
OFX Blank Plate OFX blank plate to cover module empty space.
Fits: OmniFlex Signal Conditioner
Part number: OFX-BLK
-
256 MB SD Flash card SD memory card for T/Guard+ System and Nomad portable thermometer, 256 MB (Up to 1 Gb available on request)
Fits: Nomad Portable and T/Guard+ System
Part number: NXP-314
-
Wall mount support for NomadWall mount support for Nomad, made of Delrin plastic.
Fits: Nomad Portable
Part number: NMD-WMT